Update: A Windows 10 driver now exists for the USB2-E1000. However, it will not appear in the CD that comes with the adapter until the next lot of adapters is shipped. The updated driver can be downloaded from this link:
Windows 10/8/8.1, 7, Vista, and XP drivers for USB2-E1000. If you are not able to connect to the Internet without installing the driver, you can download it onto a flash drive on another computer and use that to install it.
In testing Plugable’s USB-Ethernet adapters with Windows 10, we were happy to discover they all work successfully when their drivers are properly installed. However, an installation problem could cause issues with the USB2-E1000.
Usb to vga driver free download - VGA Driver Ati 8.33.zip, SiS VGA driver 3.78.00.zip, Intel VGA driver v7.zip, and many more programs.
Drivers are already built into Windows 10 for the ASIX AX88772 chip in our USB2-E100 and USB2-OTGE100 and the ASIX AX88179 chip in our USB3-E1000, USBC-E1000, and USB3-HUB3ME. When you insert these adapters into a USB port, the drivers are automatically installed with no need for an internet connection.
However, the driver for the ASIX AX88178 chip in our USB2-E1000 is not pre-installed in Windows 10, and we have discovered a problem with the downloadable driver that keeps it from installing. If this happens, the adapter will show up in Device Manager as “AX88178” with a Code 28 error: “”Drivers for this device are not installed.”
There are several ways to work around this issue, depending on the scenario:
1. Upgrading from Windows 7 or Windows 8.1: If you have already installed the driver for the USB2-E1000 in Windows 7 or 8.1 and upgrade directly from that version to Windows 10, the currently installed driver will be available to Windows 10, and your adapter should work without any further effort. If you haven’t yet installed this driver, please install it before upgrading. The easiest way is to establish an internet connection, either wirelessly or through another Ethernet port, then plug in the USB2-E1000. Windows Update should see it and automatically download the correct driver. You can also download and install the driver from our website or from the disk that came with your adapter.
2. Doing a clean install of Windows 10 or using the USB2-E1000 on a new Windows 10 computer: Since the previous Windows 7 or 8.1 driver will not be carried over to a clean install of Windows 10, it must be freshly installed. The only way to accomplish this is to have an internet connection available when you first plug in the USB2-E1000. That will allow Windows Update to download and install the driver. If you are in a situation where this is not possible, we recommend delaying the update until an internet connection is available, or until this issue has been fixed. Currently, the driver on the Plugable and ASIX websites is not working with Windows 10.
If you’re a user of a Plugable USB-Ethernet adapter and are experiencing issues, we’re here to help! If support is needed, please run our PlugDebug tool found here to collect system logs, and send the resulting file to [email protected] along with a description of the behavior you’re experiencing and any additional details you feel are relevant.
How-To Geek Forums / Windows 7Inland Adapters Driver Download(Solved) - USB 2.0 to IDE or SATA adapter cable(5 posts)
Several years ago I purchased a set of 'USB to IDE or SATA adapter cables' made by StarTech.com. I used them several time on my old Windows XP computer but I never tried them on my Windows 7 computer until now. They still work fine when I connect an internal IDE hard drive using these cable through my USB port but when I attempted to connect an SATA internal hard drive I got an error telling me that Windows 7 could not find a driver. I went to StarTech.com web site looking for a driver for Windows 7 but when you go to their download section there is no driver to download. I tried contacting them by email well over a week ago and got no response even though when i completed there form to send the email it said I would get a reply within 48 hours. Does anyone know where I can get a driver for this set of cables that will make it work on Windows 7. I know that I can just open my computer and connect it internally but the reason I purchased these cables in the first place is so I will not have to do that. The driver cd that came with these cables does not have a driver that will work for Windows 7.
LarrySr,
found this from some feedback another user / owner of this device left ..
[quote]'Here's how to install it so it will work for you:
Have the drive turned on and running when you plug it into your (running) computer's USB. If you get a 'Found New Hardware' message, you're good. If not, click Start, and right click on My Computer, go to Device Manager, right click on Disk Drives and click Scan For Hardware Changes. After the scan, see if the drive shows up. If it doesn't, just reboot and it should show up. After the drive has been detected once, it will behave like a flash drive. Just always remember to use the 'Safely Remove Hardware' feature when you unplug the USB, and always be sure the drive is running when you plug in the USB.'[/quote]
it might be worth the shot and might do the trick for you. i stopped scouring the feedback when i found that but feel free to check some more incase someone else has another suggestion.
see here: http://www.newegg.com/Product/Product.aspx?Item=N82E16812200155
Thank you Vistual. I tried what you said and at first I thought it didn't work then I remembered that this is a new hard drive and it will not show up until I initialize it, assign a drive letter and partition it. Once I did that it now shows up. I thank you for helping me through this and jogging my memory.
i should be thanking you ..
might end up buying one of those things now! LOL!
I find it very useful when I am fixing up old computers which I do a lot of. I pick up old computer that don't work, fix them up and find them new homes with families that cannot afford to purchase computer but need them for school work. Again; thank you.
Topic Closed
This topic has been closed to new replies. Ati mobility radeon 9600 series driver update xp.
Jul 21, 2015 The chipset drivers are embedded into windows, you can't add or remove them they are always there. As for any missing drivers that windows 10 didn't install, it's not a supported OS. Windows 10 preview isn't for anyone, it's for IT people who know that it's not supported by board MFG until the preview goes GA and RTM. Asrock chipset drivers windows 10. © 2019 ASRock Inc. All rights reserved. Information published on ASRock.com is subject to change without notice. Terms of Use Notice Privacy PolicyTerms of Use.
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |